Jump to content

NathanKEnut

Members
  • Posts

    10
  • Joined

  • Last visited

Posts posted by NathanKEnut

  1. 2 hours ago, chestikoph1 said:

    Hey Nathan,

    i fitted the same motor into my ke55 a few years ago now and did the wiring in the conversion, I have some notes I took at home, I will see if I can dig them out for you.

    I have a couple of photos I took of the relay board that may help, this is just for the engine management side of the harness.

    i am running the factory ECU with a Nistune daughter board 

    With the factory boost control system I wouldn't bother with it, just go after market 

    image.thumb.jpeg.f35c71440e6a81d0ded60577410323c3.jpegimage.thumb.jpeg.4acef7d1bf6e15e95f27e9bfcb7558bd.jpeg

    cheers mate, appreciate it

  2. 5 hours ago, altezzaclub said:

    OK, so you don't need the air con or neutral circuits.

    It seems the battery permanently powers the injector resistors, the ECCS relay, the rad fan relay, the AAC valve and terminals #46 & 109

    Ignition adds the coil, the wastegate solenoid, the fuel pump relay, the check engine light & terminals #36 & #34.

    Is that how it looks to you?

     

    sr20det-wiring coloured.jpg

    thanks altezzaclub, will check over this tomorrow but looks about right 

  3. Quick update.. i have installed

    36- red/black wire to ignition on

    34- orange/blue to START

    ECU grounds to body of car

    car was missing the eccs relay/ecu relay which i recently picked up

    just bought a fuel pump relay and connected as instructed, i used the 106 pink/black wire 

    looks like ecu is not coming on, can't find any spark aswell as fuel pump not turning on. car cranks over fine. 

    what am i missing?

     

     

    252389407_ScreenShot2018-10-09at3_08_48PM.thumb.png.3f95debc877b13c6762e8f0eed6cdd7b.png697480254_ScreenShot2018-10-09at3_08_55PM.thumb.png.6405b6b7601c15e816783e1908f12320.png

  4. Thanks guys for the replies, appreciate the tips and tricks, budget is the main issue at the moment so if i can properly wire the car up my self that would be a score, I've been downloading manuals and diagrams trying to find the best ones that i can understand, il take my time to do it right so no dramas a cure down the track, be patient is the key to this i guess haha. Again thanks for your replies

  5. Hi all, i am up to the point were i want to start wiring my Sr20 engine harness to my ke55 body loom, for those of you who have done it or know whats required able to fill me in with what wires i need to connect to get the motor running, also have an external fuel pump which needs to be connected too, thanks and hope to here from someone soon 

     

×
×
  • Create New...