parrot
Global Moderator
-
Posts
2986 -
Joined
-
Last visited
-
Days Won
77
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by parrot
-
-
I’m 14 x6 on the AE86 and 13 x 6 on the TE27 (when it can roll). 13 x 5.5 on the KE15 for now which is overkill unless I can find some nice period 13 x 5 for it.
Considering the Falcon GT had 6 inch wheels from memory.
It’s just too much unsprung weight. And of course modern tyres are incomparable to what was available back then. I appreciate tyre choices are somewhat limited, but not impossible.
Those wheels on MS car look phenomenal!
-
1
-
-
I’ve never understood the push to put huge wheels and tyres on such small cars.
-
1
-
-
Paint has nothing to do with anything, and isn't factory
-
I am. First modern car that's moved me since the original WRX.
I'm less enthused by the price increase though.
The GR86 however leaves me very cold.
-
It won't help you to learn that retractable belts were actually available in the USA. i've got one rear NOS belt I located along the way. I can't see why you couldn't retrofit something from a later model, but you would need to ensure the angle were set up same as in the donor.
-
On 3/26/2021 at 1:44 PM, Banjo said:
Believe initial 1000 off, sold at basically $ 40K, Next batch at basically, $ 45K. Third price hike was around $ 50K, with an extra $ 5-6K for the Rallye WRC version.
Currently $54500 drive away (in Melbourne)
-
That’s your wiper motor
-
I want a red one
-
But would you have anywhere to drive. Perhaps you could switch to one of those K powered boats I saw somewhere recently.
Fluffy pup is a miniature cavoodle. Not a lap dog, they are the toy breeds. Miniatures are the middle size, and he is 9kgs at 5 months old.
If I hadn't got him, I could of bought Styler's K motor!
He needs a good shearing but the groomer is grading him up to that over three visits. Today was visit two, so fluffier than usual.
-
I’m clearly no cool kid, but everyone wanted to pat my dog at our inaugural Bunnings trip today.
Counts as car related as I was there for a new tin of contact cement to fix my $50 sanding block that shed its Velcro after one day
-
WTF! Whenever I type does, it self corrects on posting as does. Now I'm becoming (even more) paranoid
-
My tinnitus has got worse. Is that the government sending messages to my brain.....
And for some reason, I am unable to edit my post above to spell 'does' correctly. is this part of ....'the conspiracy!!?'
-
So I got does 1 of the Pfizer vaccine today. About a month earlier than expected which is pretty fast. Only another 25,000,000 people to go!
Get on it people, when it’s available to you
-
I had both on a 2T. You need breathing and compression To make it worthwhile. Also understand it will never work optimally unless you are prepared to spend some dyno time. And don’t expect old carbs with twisted spindles to be easy to set up
it was a longtime ago but on same motor, twins had a wider useable rev range, made a modest amount of extra power especially at the top of the range, and revved much cleaner. Maximum rpm came up very quickly with the twins
-
i was just looking at that Yaris. Might have to go and have a look at one in the metal.
-
$12750, plus buyers premium which I see is a minimum of $1000.
-
$7250 now with 2 days to go. There’s also a 6% buyers commission. That’s a bit of a lurk. Well hopefully it will get driven and stay in Melbourne, rather than stuck away in storage somewhere. I friend of mine has an essentially nil mileage TA23 he just has stored away. Although he does have a Ferrari 308 and an RT Charger amongst other interesting things That do get driven. He gets first look at things as he works in the trade. Some years back he sent an auto KE15 to Shannon’s unreserved and it only went for about $1200 to a guy who gave it to his daughter as a first car. That idea just fills me with horror.
-
How many drivers are there on the road. How many of them have the remotest interest in "old" cars. Not many as a proportion.
When my 18yo son was in the market for a car, I made sure he ended up in a current model Mazda 3. I don't really like driving it, a very sterile experience. But it has every safety feature you could ever dream of, and that's what both of us do like. There have been a couple of occasions in year one where it has automatically braked and saved him from an accident. Money very well spent. And to think my AE86 is now worth close to the same as his Mazda? Most people could not understand it. I know which one makes me smile whenever I drive it. But I also know which one he (and I) would prefer him to be driving.
-
Don’t make me look.
Is it a Delorean? In that case yes.
-
Had a very similar intermittent fault with my initial 4AGE conversion in the AE86. Was fine for a long time, then would intermittently stop. No start, no start, then eventually restart. Sometimes the next day. Turned out a soldered joint at the EFI relay had popped off the junction box so was making intermittent contact. Very frustrating.
Also had a similar issue with idle. The fix came after I installed the idle up sensor. Called the A/C idle up sensor but also increases idle speed with other increased electrical load such as lights etc. For some years I sat at traffic lights in Melbourne traffic with foot on accelerator. It did become somewhat tiresome. That was with 268 degree duration cams where the maximum the ecu could supposedly cope with was 270. That was according to Wade's who did some development work with Toyota on the bigport. Initially I had a factory 4AG engine loom spliced into the 4AC charge/lights and dash loom. Then I installed factory 4AGE AE86 charge/light and dash looms as well. I have never had issue with over run
-
Water cooled alternators! I wonder what uses those. Probably a Bugatti Veyron or some such. I was working through that and wondered what the field current is, and got onto another page that explained it quite well.
It actually starts to make sense, sort of. I seem to recall my old Datsun 1600's had adjustable regulators I vaguely recall twiddling with no idea of what I was doing, and no doubt made things worse. But at least it turned me to reliable Toyota's
-
Now I’m not the most electrically minded, but was looking at a Nippondenso KE15 and KE70 alternator regulator yesterday and wondered, what’s the difference?
I’m guessing it has something to do with the output rating of the alternator? Certainly some of the wires are a bit bigger on the later regulator. But these little magic boxes have always puzzled me. What exactly do they do?
-
Have had a look at it and realised that pdf's can't be attached to a post anymore.
Have saved the KE1x gearbox set as a jpeg but not sure how they will print. I'll have a go at it and if they work, I'll redo the rest
-
So took some holidays after being told 12 weeks banked was extreme. I resisted, but once I accepted it, realised how exhausted I was and counted the days. First week was a write off after heading to the GP on day 1 for a long put off general check up revealed I had diabetes. Multiple blood tests and dr visits ensued including seeing an endocrinologist the next day after pulling a few strings. Good news is that it’s manageable and seems to have been discovered before it has caused any lasting damage. Moral is, it’s worth getting checked out.
Much of the second week has been a write off after collecting our long awaited puppy! Like having another baby! He is good fun, but lots of work.
Amongst all this I have managed to get to work on the spot rust on the KE15. Elected to go carefully with a polystrip disc which effectively takes off the paint and virtually all the rust below without too much heat to distort the panel. Happily no evidence of panel perforation, so the years of careful storage without putting a tarp over it have saved it. Then treated what minimal rust remains with KBS rust blast which also etches the bare metal. The bonnet shows basically what the roof looked like beforehand. There’s a great old school paint shop, Milsome’s in Ferntree Gully who were able to put some factory colour, including for the TE27 into an aerosol, so shall see how that goes as an interim measure.
Finally treated it to a xmas present with a NOS factory option twin outlet exhaust contraption. The box is straight thru, and the whole unit bolts on after the muffler.
Golf GTI
in Automotive Discussion
Posted
So kids are growing up, beach house sold and the Nissan Xtrail which has done sterling service is a bit dull and frankly I'm over driving a manual in heavy city traffic. Plus no one else in the family drives a manual, and daughter needs to drive an auto for her learners. Yes I'm developing a story for the wife on why I need to buy a Golf GTI! I'm thinking a 2015 which I gather is when they went to an improved motor and marginally enlarged interior I believe. Hoping to get one with leather interior around $25K.
Anyone have any insight into these? They have a timing chain rather than belt, but am seeing they need waterpump changes around every 50k. I would be keeping mine absolutely stock.
I seriously considered a WRX, but family shouted that down as a thug car! Plus they sound a bit of an effort to drive with not a lot of auto's around.