Search the Community
Showing results for tags 'ke30'.
-
Hi all, My ke30 which had been running fine until the other day suddenly stopped starting. There's no sound what so ever when you turn the key, battery is fine, timing is fine, carby is getting fuel, fuses are all fine. I've ordered a new starter motor because that's all i can think of or maybe some electrical fault that means the starter isn't getting power? Any thoughts would be appreciated. Further context, It's got a 3T in it running with an old asian carby which has been rebult. Currently sitting at a radiator repair shop as they had to bypass the oringinal copper pipe valve to the heater core, don't imagine anything they were doing would have caused the issue, but who knows.
-
Hello! New to the forum! We just recently bought a KE30, the P.O swapped it with a 3TC, a 5 speed transmission (not sure if it is a T50 or K50 trans), and an all disc brake. Here is the pic of the car: Upon inspecting the car, I noticed that the front part of the engine (near the rad), is raised up a little bit, I read in some forums that you will be needing the 2TC mounts for it. My question would be is it only the rubber mounts that you need when swapping it with a 3TC? or do you also need the 2TC metal brackets that holds the block? or I can use the 3TC metal brackets but use the 2TC rubber mounts? Here is a pic of the engine bay before we bought it. (Yes, I know, it's dirty): I am concerned with the angle of the engine as it affects the angle of the transmission yoke, prematurely wearing the cross joint bearings, and currently needs replacing, so if fix the cross joint bearings, I also want to address the reason why is it wearing prematurely. Someone said that a 3TC mount is used in our car, the ones found in the KE70s or TE70s Also are these 2T brackets? And will I be needing these to correct the conversion?
-
Good evening all, I recently bought a KE30 Corolla 2 door for R12000 (around 1000 aud). It isn't in the best shape and I have intentions of restoring it, but, I am having trouble finding parts for it, new or old, over here in Botswana and South Africa. Does anyone know of a place where I can get spares and performance/accesories for it online that will ship to South Africa, Ebay unfortunately doesn't help as most people aren't willing to ship to SA. So any website links or places in Botswana/South Africa, preferably not a sketchy place in one of SAs shanties, would be greatly appreciated. This is my first car and I am only 16, so any advice going forward would be amazing as well. Thank you in advance.
-
Hey all, as title states I binned the KE55 and lost the front wheel while cruising and now the front LHS LCA is messed up. Anyone in South Australia have a LCA from a KE30 or 55 I can buy? Or postage to SA 5501? happy to buy a pair if need be. Cheers Ryno.
-
Hi, wondering if anyone could tell me the length of ke20 and ke30 LCA lengths? (Centre of ball joint to centre of bushing) also want to know if a ke20 ball joint will fit into ke30 LCA? And if ke20 caster arms and sway bar link bolt in to the ke30 lower arms? basically wanna use the aftermarket T3 ke30 LCA’s in my ke20 https://technotoytuning.com/toyota/ke30/front-lower-control-arms-ae71ke70ke30-corolla cheers.
-
Want to buy car seat covers / material similar to photo. Striped cloth material. Other options considered... PN prefix is 71071S front, 71075B rear. I'm in Melbourne, Australia. Thanks all!
-
Hi Rollaheads, I am looking to make reproductions of the TRD tosco seats. I am checking out a few guys who can make them and also want to make sure they are done with good finishing. I wonder if anyone is looking for them too? It will be cheaper to make them in bigger quantities, so we can cost down the product price. I'm targeting at the range of USD$220-270 for each (the cheaper the better), hopefully I can get a good deal negotiating with suppliers. Who ever is interested, can leave me a contact details so I can share more photos when I get the first samples ready.
-
WTB clutch peddle ke30-55
-
Wanting a ke30 dashtop in good condition
-
Hi all I'm brand new around here buying my first rolla this week I'm very amateur when it comes to mecahnical work but hoping to learn more I have found a stock ke30 unmolested besides a 4k engine swap for a very decent price is there anything i should look out for when buying and also if anybody could point me in the direction of a mechanic or engine place in brisbane that will do some work on it or is used to working on them i am trying to do as much research as i can and am very willing to learn.
-
Hey, I recently moved and had to get rid of my KE30, but I just can not bear to not have a Corolla. I apologize if this is not the correct place to do this but does anyone have a project corolla for sale in the eastern United States area? Mostly just looking for a manual 2 door, and I'd love a 71/74 but any pre 1980 corolla would make me plenty happy. Thanks, Goose
-
Want to buy ke30 corolla 2 door sedan, must be in reasonable condition. Would consider ke20 also. Located in melbourne
-
Anyone know the thread size for the temp sensor on a ke30 1.6? I have no manual and I'm a bit confused about identifying it. With that beeing said if you have a manual id like to purchase. Thanks as always
-
Waiting on parts so i restored grill, emblem, removed dents and blemishes from chrome trim. Didn't work out all the dents yet but when I do I'll file the surface smooth, carefull not to go threw just knock down the highs and sand and buff till new. Believe me it was Easter to fix them find. With trim just be easy small taps re establish the lines and the rest will follow.
-
Looking for a manual console for my ke30 as Well as lower grill chrome or hood trim. Consider a while grill if not alot... Mines in good shape
-
Hi all, i am up to the point were i want to start wiring my Sr20 engine harness to my ke55 body loom, for those of you who have done it or know whats required able to fill me in with what wires i need to connect to get the motor running, also have an external fuel pump which needs to be connected too, thanks and hope to here from someone soon
-
Selling Custom Made KE30 Aerokraft Wing and Flares Pre-Order Wing- $195 USD including PayPal fees and shipping Flare-$220 USD including PayPal fees and shipping Shipping Worldwide with Tracking Paypal Payments only
-
Hi all, I am looking to get my hands on a good set of ke30 taillights and full chrome short bumpers (front and rear) for my ke55, I am located in sydney, cheers
-
Hi Rolla enthusiasts, I have a Ke30 rolla and would like to do an engine swap for a daily driver. Whats the best one for low budget and what mods can be done to it? Thanks in advance.
-
Hey guys, so I'm currently driving my ke30 up to Dubbo for mysterybox rally. Had a bit of trouble yesterday with overheating. Managed to encourage her through a 500km trip, 35 degree heat. Most of the time she ran fine, but she over heated twice. It seems there is excessive purging out the overflow bottle, then coolant gets too low and it overheats. Has a new water pump and new thermostat, plus good coolant. I'm hoping maybe it's just the radiator cap is a bit faulty? Don't want to think about a head.. cheers for some advice!! -
G’day everybody I’m chasing a few bits for my ke30 I need a cream passenger sun visor, and a front cowling would prefer one with the spoiler. I’m located in Tasmania Australia. Thanks in advance
-
Hey guys, Working on my 79' Corolla. Previous owner has replaced the 4K-C engine with a 3K engine. Everything is connected correctly and have checked everything 100 times. Now, everytime i start her up, she runs well but as soon i put her in drive it stalls. Been trying to adjust the idle screw, but don't get much of a response from the motor. Has anyone got an idea of how the vacuum setup differs between the 4K-C engine and the 3K engine. If so can you suggest a diagram to follow to make sure it is all connected in the right spot. Or could this just be a completely different issue all together? And has anyone got a clue how to decode the engine number, so i can figure out a manufacturing year? Cheers fellas.
-
Hope this is okay, sharing my gumtree add: Ke30 corolla sedan 1978 toyota, http://www.gumtree.com.au/s-ad/springfield-lakes/cars-vans-utes/ke30-corolla-sedan-1978-toyota/1163798315?utm_source=com.google.android.apps.docs&utm_medium=social&utm_campaign=socialbuttonsVIP&utm_content=app_android Price: $3,800 Springfield lakes qld
-
So long of the short, what coolant for 78 KE30? New to this, but want to try to get it right. Any help much appreciated !
-
Got a 2 door ke30 WTB front coilovers.
