Trufauru Posted October 25, 2007 Report Share Posted October 25, 2007 in a web where a guy put an engine in the trunk of his acura, he do this with the brakes and then says No longer front wheel drive, thus no front drive axles, I used a 1" grade 8 fine thread bolt torqued to 192 ft.-lbs. to hold the preload on the front wheel bearings. There is a conversion formula to calculate bolt torque for equivalent tension load between two different bolt sizes and thread pitch. I also made a small bushing to hold the 1" bolt centered in the splined hole in the hub. the ones not painted are form a CE110 and the red ones from a KE70, can something be done??? and for the record I'm form uruguay so, no AE86, no RX7, no Silvias/200sx to take brakes from thanks in advance Sebastian OUt Quote Link to comment Share on other sites More sharing options...
VHR32 Posted October 28, 2007 Report Share Posted October 28, 2007 I see what you want to do. the answer is maybe it can be done, you wont be able to swap the lower control arm though. Quote Link to comment Share on other sites More sharing options...
tas_ae71 Posted October 29, 2007 Report Share Posted October 29, 2007 do you want to swap just the brakes or the whole setup..? suspension, strut etc? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.