Jump to content

Golberg’s 4age 16v Cooling Guide


Golberg

Recommended Posts

Members dont see this ad
  • 5 months later...
  • 7 months later...

the witzl made this for me because i didnt know how to allow for the heater module

 

it really helped me so i hope it serves well to others

 

the setup most people have shown are suitable for 100kw motors, i have done a bluetop(86kw) motor and have come out with these:

the pics are the ones from the FAQ only in english. NOT a direct translation but this is how i have done it and it works overrated

 

post-6811-1247662383_thumb.jpg

 

this is one view of how it is setup and how it should all flow

post-6811-1248876446_thumb.jpg

 

and this is how i cut the pipes to make it fit (NOTE: you will need some 90degree bends to make it clear different parts of the motor)

post-6811-1248876494_thumb.jpg

 

 

enjoy

post-6811-1248876436_thumb.jpg

Edited by kiahn
Link to comment
Share on other sites

  • 1 year later...

mounting an ae82 4age remote thermostat to rwd. we chopped/welded the heater return pipe so it didn't head towards the block and also shortened the water pump inlet pipe to suit and think we changed the cold idle valve piping to suit. was a while ago

 

4ageke30-022.jpg

 

and a small port 4agze engine converted rwd with ae92 4age remote thermostat (much better fit). notice position of knock sensor under #3&4 instead of 2&3 on n/a 4age smallport. pic courtesy of 'stolic' on toyspeed forum.

 

gze-rwd-water.jpg

 

and another ae82/ae92 remote thermostat comparison pic

fwd-ae-thermos.jpg

  • Like 1
Link to comment
Share on other sites

×
×
  • Create New...