Trent-KE30 Posted February 20, 2014 Report Share Posted February 20, 2014 Looks nice what colour is that? Quote Link to comment Share on other sites More sharing options...
SpicemanSteve Posted February 25, 2014 Report Share Posted February 25, 2014 after a lot of stuffing around we decided to use an aftermarket intake and 100mm throttle body the firewall needed a little bit of work to get it to fit That's a great project there mate! I'm sorta doing a build (see it here: http://www.rollaclub.com/board/topic/68851-7m-gte-into-1976-te37/) but on a much smaller budget. The sheet metal work is off the chains!! I have the same manifold and throttle body. What TPS did you use? Quote Link to comment Share on other sites More sharing options...
67Rolla-Ken Posted February 25, 2014 Report Share Posted February 25, 2014 That paint looks fantastic on the door! Quote Link to comment Share on other sites More sharing options...
1JZKe55 Posted May 28, 2014 Author Report Share Posted May 28, 2014 hey guys its been a while but things are still progressing slowly motor is done 1 Quote Link to comment Share on other sites More sharing options...
67Rolla-Ken Posted May 28, 2014 Report Share Posted May 28, 2014 I can't use the emoticons from my phone but... drool! That is one serious looking engine! Quote Link to comment Share on other sites More sharing options...
51RJZ Posted May 28, 2014 Report Share Posted May 28, 2014 nice, what specs did you go with your engine? I update the 1j list so ill be interested to see how you go once your finished. Quote Link to comment Share on other sites More sharing options...
1JZKe55 Posted May 28, 2014 Author Report Share Posted May 28, 2014 The engine has been decked blueprinted and balanced SPOOL Forged H Beam Conrods CP Forged Pistons 1mm oversized Cometic MLS Head Gasket ACL Race Series Main Bearings ACL Race Series Big End Bearing 9.0.1 comp Full ARP stud kit rods,mains & Head Custom oversized Ferrea valves 6000 series, custom ported head Brian Crower cams and retainers, valve locks Quote Link to comment Share on other sites More sharing options...
51RJZ Posted May 29, 2014 Report Share Posted May 29, 2014 Nice should be quick with that setup Quote Link to comment Share on other sites More sharing options...
1JZKe55 Posted August 26, 2014 Author Report Share Posted August 26, 2014 (edited) Hey guys its been a while but things have still been progressing here's a little teaser ;) Edited August 26, 2014 by 1JZKe55 Quote Link to comment Share on other sites More sharing options...
1JZKe55 Posted August 26, 2014 Author Report Share Posted August 26, 2014 ;) Quote Link to comment Share on other sites More sharing options...
1JZKe55 Posted August 26, 2014 Author Report Share Posted August 26, 2014 That's a great project there mate! I'm sorta doing a build (see it here: http://www.rollaclub...into-1976-te37/) but on a much smaller budget. The sheet metal work is off the chains!! I have the same manifold and throttle body. What TPS did you use? standard 1j off of the original throttle body Quote Link to comment Share on other sites More sharing options...
67Rolla-Ken Posted August 26, 2014 Report Share Posted August 26, 2014 That really is an amazing colour!! Quote Link to comment Share on other sites More sharing options...
Feral4K Posted August 26, 2014 Report Share Posted August 26, 2014 Grouse finish on those tubs ! Quote Link to comment Share on other sites More sharing options...
1JZKe55 Posted August 29, 2014 Author Report Share Posted August 29, 2014 All the brakes are detailed ready to go and we did a small wheel stud upgrade :blinks: the new dash face is also starting to come together Quote Link to comment Share on other sites More sharing options...
1JZKe55 Posted August 30, 2014 Author Report Share Posted August 30, 2014 Its getting closer :thumbsup: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.