Jump to content

How To Set Diff Pinion Angle?


ke704agte

Recommended Posts

Members dont see this ad

If you took the driveshaft off you could measure how far off vertical the diff pinion face is with a spirit level.

 

I'd make sure the driveshaft joints are all good and the shaft is balanced before tackling the diff angle, unless it is way out compared to an R31.

 

If you get measurements you might convince me to measure my R31 Pintara and my KE70 in the same way, so you have a comparison.

Link to comment
Share on other sites

pinion should point down 5 degrees, but that is for traction purposes.

A tailshaft will wobble the most if it is lined up perfectly, you need a little bit of offset in any direction for it work properly.

 

Having said that, as altezza said, its unlikely that is the problem. check your uni joints, if there is ten thousands of a mm free play in any of them they need to be changed.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...