Jump to content

Ke70 Corolla - Volvo B230Fk - Now With 2Jz :)


GretarK

Recommended Posts

  • 1 month later...
Members dont see this ad
  • 1 month later...
  • 2 weeks later...
  • 1 month later...

Put my new camshaft in. It has a higher lift and really makes the engine come to live after 5500rpm were it lost all it´s flow before.

its a turbo camshaft from ipdusa.

 

here you can see the difference on the new and old cam

20140208-rolla012_zps04b0be80.jpg

 

also put in a new distributor and cap and some new spark plug wires

20140208-rolla013_zps9addc11f.jpg

20140208-rolla016_zps571ccc1a.jpg

 

Did a little buffing on the roof, hood an wing. Thinking about keeping it this way until next winter. just buff the rest of the car, what do you think ?

20140205-rolla004_zps35562eb9.jpg

20140205-rolla003_zps4f053f90.jpg

20140205-rolla005_zps81e3638f.jpg

20140205-rolla006_zpsf8a226f8.jpg

Link to comment
Share on other sites

  • 1 month later...

Did some more last weekend :)

 

Put in the original front swaybar, with super pro poly bushings

And also did the rest of the poly bushings front and back

Whipped out the diff and put a spacer in the lsd locker.

ordered 7cm wide plastic fenders and 4x114.3 to 6x139.7 adapters for the front wheels

 

 

20140412-Foacuteethringar043_zpsa5b8345f.jpg

20140412-Foacuteethringar046_zps87324061.jpg

 

bushing porn for you weirdos who are into that..

20140412-Foacuteethringar038_zpsfbf37a2c.jpg

20140412-Foacuteethringar033_zps284400f7.jpg

20140412-Foacuteethringar050_zps1fd19c4d.jpg

Edited by GretarK
Link to comment
Share on other sites

  • 2 months later...

mostly been driving this thing for the past weeks.

Except a head gasket change, new clutch with a heavier pressure plate. Putting in the heater element. New rear wheel bearings.

Making a oil catch can, and some other smaller stuff :P

 

here are a few pics of it in action

 

10339524_10152172217666903_8810343325220508877_o_zpse3df38b4.jpg

10151804_10202191763497994_198352576961710480_n_zps3b19f6b5.jpg

10362797_10203454008924209_8565879450128459490_o_zps798d8505.jpg

10258360_10152166980816903_9054119298364656778_o_zps2d0e574a.jpg

10450094_10152195443362263_1283835269673454811_o_zpsbf02fcad.jpg

10371690_10152553446329026_8984575928072826330_n_zpsf5126636.jpg

10494451_10152195443312263_8526843012335252915_o_zpsc772a3c7.jpg

10447046_10152549819647628_1610493589582533784_n_zpsd1cfb01d.jpg

20140615-Biacuteladagar2014065_zps1f5a75be.jpg

Edited by GretarK
Link to comment
Share on other sites

  • 8 months later...

Lovely ride mate :)

 

Just a quick question if you wouldnt mind;

What coilovers are you using?

edit: and how tall are the tubes you made for the coilover mounts in the rear?

 

Currently building a 1980' ke70 myself :) though with a sr20, and a volvo rear axle :)

Edited by ander89
Link to comment
Share on other sites

  • 4 weeks later...

Lovely ride mate :)

 

Just a quick question if you wouldnt mind;

What coilovers are you using?

edit: and how tall are the tubes you made for the coilover mounts in the rear?

 

Currently building a 1980' ke70 myself :) though with a sr20, and a volvo rear axle :)

 

thanks :)

I'm using s13 200sx coilovers because the front struts are from a 200sx ;)

I can measure the tubes but it wouldnt help much unless you are using the same setup. And I also made the brackets on the rear axle.

The way I did this, I put the coilovers in the highest position and bolted them on to the axle and mocked the rear axle under the car with wheels with room to lower it. And measured from there how long the tubes should be.

Link to comment
Share on other sites

as for updates, broke the volvo transmission. So I'm fabricating a 6 speed BMW ZF transmission on the back of the volvo engine. with a 6 puck copper clutch and heavy duty sachs pressure plate.

 

Got a fairly unused Turbo from a Evo X and will be fabricating that in there also.

 

and probably a rollcage for the season.

 

But this thing has been stealing time from the KE70 past few months :)

 

2tc with t50 and twin webers 9 and 11" wheels. pretty fun making this one

g2%20mars%20082_zpsplcx1d2e.jpg

Edited by GretarK
Link to comment
Share on other sites

  • 1 month later...

thanks :)

I'm using s13 200sx coilovers because the front struts are from a 200sx ;)

I can measure the tubes but it wouldnt help much unless you are using the same setup. And I also made the brackets on the rear axle.

The way I did this, I put the coilovers in the highest position and bolted them on to the axle and mocked the rear axle under the car with wheels with room to lower it. And measured from there how long the tubes should be.

 

Sweet, thanks for the reply :)

 

rad looking 2tc aswell :D

Link to comment
Share on other sites

  • 1 year later...

Well, I planned to do a little makeover on the rolla last winter because the body was really getting rusty and I really don't want to see it go any further with rust damage.

 

Also built a full roll cage in this process.

 

And by a complete accident put my volvo engine up for sale and sold it the same night.

 

The plan was to buy a 1jz and squeeze it in there but, went with a 2jz instead.

A borg Warner s360, 1000cc bosch injectors. And a 6 speed bmw gearbox conversion.

 

So an accidental complete rebuild of the car was suddenly in progress.

 

Here are a couple of pic that show the process

 

2016-02-13%20001%202016-01-30%20012_zpsyfqhpegy.jpg

2016-02-13%20001%202016-01-09%20003_zpsocnvvlm9.jpg

apriacutel%202016%202016-02-18%20004_zpse95jvre1.jpg

apriacutel%202016%202016-02-21%20072_zpswbqe4tvt.jpg

apriacutel%202016%202016-02-23%20006_zpskdxngba2.jpg

apriacutel%202016%202016-03-15%20141_zps6ywplhuj.jpg

apriacutel%202016%202016-03-20%20003_zpsfwbznpd0.jpg

apriacutel%202016%202016-04-07%20195_zpsqsnxjdno.jpg

apriacutel%202016%202016-03-27%20007_zpsvdfv1lbj.jpg

apriacutel%202016%202016-04-21%20001_zpsi2fz3zm0.jpg

 

apriacutel%202016%202016-03-28%20004_zpstt2iccgs.jpg

apriacutel%202016%202016-03-28%20002_zpsv17tzxvy.jpg

 

the shifter assembly that I made for the bmw gearbox.

 

apriacutel%202016%202016-04-15%20005_zps4g5b7m8c.jpg

 

and a sneek peak at the color

 

apriacutel%202016%202016-03-25%20006_zpsnanputrp.jpg

 

the 2jz to bmw adapter kit I'm using.

apriacutel%202016%202016-02-22%20009_zpsivjrhzpb.jpg

 

juni%202016-05-01%20002_zpsezkvyooz.jpg

juni%202016-05-01%20001_zpst2hczf3b.jpg

juni%202016-05-01%20004_zpscehll2bw.jpg

juni%202016-05-01%20011_zpsaifrp1nm.jpg

juni%202016-05-20%20017_zps3pua3yha.jpg

juni%202016-05-18%20005_zpstq2fyocu.jpg

juni%202016-05-24%20007_zpsratvwymp.jpg

Eyruacuten%20amp%20Nilli%20005_zps2ytnitnc.jpg

Eyruacuten%20amp%20Nilli%20007_zpsesljf25f.jpg

Eyruacuten%20amp%20Nilli%20019_zpsoztmfm6b.jpg

juni%202016-05-31%20012_zpsvu7cnlhd.jpg

 

and a couple shots of the angle, still got a bit of travel left in my steering rack. But have to make new control arms to make room for it.

Eyruacuten%20amp%20Nilli%20025_zpsw2dcyekn.jpg

Eyruacuten%20amp%20Nilli%20023_zpsd2l2tujm.jpg

 

 

a159fe9d-94a3-4507-a330-73d0d065d03f_L.jpg

b093dbb2-4e67-407d-83dd-2911d8d8f33c_L.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...