Jump to content

Ke70 4Age 16V Tvis Map Sensor Need Help


LJMC-KE20

Recommended Posts

hi guys I'm doing a ke70 4age tvis map sensor so its been to the auto elects and got all wired up and now i need to get it going it has it all injector pulse , spark, fuel .. sooooo i the motor i got had the dizzy 180 out turn it around and timed it off the wrong case marks but found out it just need to be facing upwards.. if i spray a tiny bit of start you bastard it chimes right up and idles but at like 2500 rpm and that ... if i touch the throttle body it dies so if i try and rev it . it dies ... i don't know what the problem is .. if anyone can help please kind regard locky thank you

Link to comment
Share on other sites

Members dont see this ad

First thing I'd check is that you have a "start" signal from the ignition barrel to the circuit opening relay for the fuel pump.

Then I would check for vacuum leaks, it's either that or the timing which is causing the high idle rpms.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...