Taz_Rx Posted August 11, 2014 Report Share Posted August 11, 2014 Where did you get the flywheel? And how much was it if you don't mind me asking? Quote Link to comment Share on other sites More sharing options...
Chingy Posted August 11, 2014 Author Report Share Posted August 11, 2014 Where did you get the flywheel? And how much was it if you don't mind me asking? The flywheel is made by Jun in Japan, I got this through a company in New Zealand that deal direct with Jun, I paid I think around £300 to £400 with taxes and shipping but I have seen them as much as $900!! Hope this helps Quote Link to comment Share on other sites More sharing options...
7000rpm Posted August 13, 2014 Report Share Posted August 13, 2014 Are they stock 4k flat tops? Quote Link to comment Share on other sites More sharing options...
Chingy Posted August 16, 2014 Author Report Share Posted August 16, 2014 (edited) Are they stock 4k flat tops? No these are 60 thou oversize pistons with compression raised to 11:1 https://www.facebook.com/ToyotaStarletKP61 Edited August 17, 2014 by Chingy Quote Link to comment Share on other sites More sharing options...
7000rpm Posted August 17, 2014 Report Share Posted August 17, 2014 Nice build, so i imagine you need to deck the head along with those pistons to get 11:1? Quote Link to comment Share on other sites More sharing options...
Chingy Posted August 17, 2014 Author Report Share Posted August 17, 2014 Nice build, so i imagine you need to deck the head along with those pistons to get 11:1? Thank you, yes head had been decked to up the compression. Now researching cams. Looking at an Auckland Cams #566 profile which is a Wade 140 grind Advertised duration: 290 degrees Duration @.050”: 239 degrees Cam lift: ..296” LCA: 107 degrees Open to suggestions. Basic engine spec Toyota 4k over bored by 60 thou to 1344cc Compression raised to 11:1 Ported & Flowed head, valve seat job etc Twin 40dcoe carbs Car is used for occasion fast road use Quote Link to comment Share on other sites More sharing options...
Chingy Posted September 6, 2014 Author Report Share Posted September 6, 2014 (edited) Hi few more pics https://www.facebook.com/ToyotaStarletKP61 Edited September 6, 2014 by Chingy Quote Link to comment Share on other sites More sharing options...
Chingy Posted November 13, 2014 Author Report Share Posted November 13, 2014 Hi as my build now gets well underway, can anyone help with what diff oil you should run in a TRD slipper as pictured here https://www.facebook.com/ToyotaStarletKP61 Thanks Quote Link to comment Share on other sites More sharing options...
B.L.Z.BUB Posted November 13, 2014 Report Share Posted November 13, 2014 If you right click the image, 'copy', then paste into your post you wont have to link your FB page all the time. As it is that link doesnt take us to the picture in question. Quote Link to comment Share on other sites More sharing options...
Chingy Posted November 13, 2014 Author Report Share Posted November 13, 2014 Sorry, I am using an IPad so have uploaded them to photobucket Quote Link to comment Share on other sites More sharing options...
Chingy Posted January 3, 2015 Author Report Share Posted January 3, 2015 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.