oh what a nissan feeling! Posted March 31, 2016 Report Share Posted March 31, 2016 I need to run a universal sender in my tank because the stock one doesnt love e85. Does anyone know, or could please measure the resistance of the stock fuel sender on full and on empty. if i could get this info i could match it to an aftermarket sender. So if anyone has a ke30 sender lying around they could put a multimeter on ohms to it, or a manual that tells the story. I have a gregorys manual and its not in there. cheers matt Quote Link to comment Share on other sites More sharing options...
bruce Posted March 31, 2016 Report Share Posted March 31, 2016 What year is your KE30? I noticed there is a difference in the fuel gauge readings. I put a 1976 KE35 gauge in my KE30 and the fuel gauge was a bit out, so I put in a 1976 fuel sender and it was OK. Quote Link to comment Share on other sites More sharing options...
cuzzo Posted March 31, 2016 Report Share Posted March 31, 2016 (edited) Looks like 3.6 Ohms Full and 110 Ohms Empty. Measured with Ohms meter across body and pole off fuel sender unit. Bottom most position for empty, top most position for full. Edited March 31, 2016 by cuzzo Quote Link to comment Share on other sites More sharing options...
oh what a nissan feeling! Posted April 1, 2016 Author Report Share Posted April 1, 2016 mines a 76 model with the early dash. cheers for that cuzzo thats very handy, it matches pretty good for a boat sender i have found so very happy. thanks again. Quote Link to comment Share on other sites More sharing options...
cuzzo Posted April 2, 2016 Report Share Posted April 2, 2016 Please let me know your source. might need a replacement myself. Ive tried to retrofit the factory sender to my custom tank but havent tried it yet. Quote Link to comment Share on other sites More sharing options...
rebuilder86 Posted April 4, 2016 Report Share Posted April 4, 2016 if u are stills trugling to find this, i can tell you suzuki have a fuel level sender with the exact same setup as the toyota 3-110 ohm sender. Its installed in suzuki multicabs and Toyota liteaces. Quote Link to comment Share on other sites More sharing options...
oh what a nissan feeling! Posted April 10, 2016 Author Report Share Posted April 10, 2016 It turns out the one i had found works opposite to what i need, so full is 110 and 0 is empty. so no luck yet, i can use one from another vehicle but it needs to be e85 compatible, so not real common. It may come down to using an autometer guage. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.