86Ali Posted June 15, 2019 Report Share Posted June 15, 2019 (edited) OK, so I just assembled my XT130 struts and springs and camber tops, using the XT130 LCA's, and TTT AE86 PS knuckle. Put on my 14" wheels and they don't spin? The caliper is not touching, and can't see anything else fouling? Before installing the hubs spun freely? I think the dust shield is pushed up against the rotor. does the AE86 Knuckle move the strut inwards? I'm thinking I have to remove the dust shield, or grind down the end of the LCA(don't want to do this.....)or get a NRCA? Anyone else come across this? Edited June 15, 2019 by 86Ali Quote Link to comment Share on other sites More sharing options...
Taz_Rx Posted June 15, 2019 Report Share Posted June 15, 2019 Using rca's? Quote Link to comment Share on other sites More sharing options...
LittleRedSpirit Posted June 19, 2019 Report Share Posted June 19, 2019 Sometimes you need to tap the end fold of the LCA a bit flatter to make clearance, but not usually with rcas. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.