Jump to content

Adding Oil Cooler to a Toyota


Banjo

Recommended Posts

Members dont see this ad

The first time I installed the aftermarket cooler in my AE86, I installed it upside down.  After some thinking about fluid dynamics, I eventually worked it out.  

I'm sure that was their thinking above also

Link to comment
Share on other sites

Had to think about that one Pete !    I've never had an after market oil cooler, so have never considered that it could be fitted upside  down.  I gather, you are referring to drain back,  (after engine shut down) , of the oil in the cooler,  seeping back into the sump, if the cooler is mounted above the height of the sump, which most are.

So the top hose on the oil cooler, should be connected to the "sandwich plate connection" under the oil filter, that comes from the oil pump outlet ?

Cheers Banjo

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...