A/Model/AE70/71/85/86/Installing An Electronic Distributor

From Rollaclub
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Want to run a FWD 4AC electronic dizzy on your RWD 4AC ?

The dizzy can be found on either the AE80 2a or the AE82 4a.

Run electronic ignition coils on full 12 volt eg bypass ballast resistor.

Pin 3 & Pin 7 both go to the dizzy - electronic type ( 3 goes to negative side 7 to positive side ) Pin 15 - Positive side of Coil Pin 16 - Negative side of Coil Unmarked Pin was earth.


Post-3388-1189153221.jpg

Electronic Ignition module location.

Post-3388-1189247640.jpg

Information courtesy of KE30 KE35 KE55.

Edited by Trev.

Thread link http://www.rollaclub.com/board/index.php?showtopic=15085&pid=197131&st=0&#entry197131