A/Model/AE70/71/85/86/Installing An Electronic Distributor

From Rollaclub
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Want to run a FWD 4AC electronic dizzy on your RWD 4AC ?

The dizzy can be found on either the AE80 2a or the AE82 4a.

Run electronic ignition coils on full 12 volt eg bypass ballast resistor.

Pin 3 & Pin 7 both go to the dizzy - electronic type ( 3 goes to negative side 7 to positive side ) Pin 15 - Positive side of Coil Pin 16 - Negative side of Coil Unmarked Pin was earth.


Post-3388-1189153221.jpg

Electronic Ignition module location.

Post-3388-1189247640.jpg

Information courtesy of KE30 KE35 KE55.

Edited by Trev.

Thread link http://www.rollaclub.com/board/index.php?showtopic=15085&pid=197131&st=0&#entry197131

Retrieved from "https://www.rollaclub.com/wiki/index.php?title=A/Model/AE70/71/85/86/Installing_An_Electronic_Distributor&oldid=3783"