General Specifications: Difference between revisions

From Rollaclub
Jump to navigation Jump to search
Line 183: Line 183:
| 1.0 - 1.5 turns
| 1.0 - 1.5 turns
|-
|-
...to be continued...

Revision as of 11:28, 29 July 2013

Toyota Corolla Ke2# 1970-1974 Specifications

General Specification Sedan Coupe Wagon
Wheel Base 2335mm < <
Wheel Track (front) 1255mm < <
Wheel Track (rear) 1245 < <
Overall Length 3955mm < 3990mm
Overall Height 1375mm 1345mm 1405mm
Ground Clearance 170mm 150mm 170mm
Tyre Size 155R12 4 Ply 155R13 4 Ply 155R12 6 Ply
Engine Toyota 3K Toyota 3K-B Toyota T
Type Inline 4 cylinder, 4 OHV <Twin Carburettor <
Bore & Stroke 75mm x 76mm < 80mm x 70mm
Displacement 1,166cc < 1,407cc
Compression Ration 9.01:1 10.0:1 8.5:1
Maximum Horsepower 73hp @ 6,000rpm 83hp @ 6,600rpm 93hp @ 6,000rpm
Maximum Torque 74.2ft-lb @ 3,800rpm 75.2ft-lb @ 4,600rpm 91ft-lb @ 3,800rpm
Battery 12volt-32AH (optional 40 & 60AH) < 12volt-35AH (optional 40 & 60AH)
Alernator 12volt-360watt (optional 380watt) < 12volt-380watt
Starter Motor 12volt-0.6kw (optional 0.8kw) < <
Thermostat Opens @ 82.2*C - Full Open @ 95C*C < N/A
Water Pump 6 blade centrifugal impeller < N/A
Carburettor 3K 3K-B
Type Dual down draft, double throat Twin, dual down draft, double throat
Throttle Bore 28mm <
Primary Venturi 21 x 7mm 18 x 7mm
Secondary Venturi 24 x 8mm 23 x 8mm
Primary Main Jet 0.99mm 0.84mm
Secondary Main Jet 1.75mm 1.4mm
Slow Idle Jet 0.48mm <
Primary Idle Correction 0.81m 1.1mm
Secondary Idle Correction 1.2mm <
Primary Air Correction 0.5mm <
Secondary Air Correction 0.5mm <
Accelerator Pump Jet 0.4mm <
Economiser Jet 1.0mm <
Power Jet 0.76mm 0.58mm
Float Level - raised 6.6mm <
Float Level - lowered 50.0mm <
Idle Speed 600rpm 670rpm
Idle Mixture Setting (from seating) 2.0 turns 1.0 - 1.5 turns