Main Page Old: Difference between revisions
(KE30/35/36/38/50/55/55p Suspension) |
|||
Line 24: | Line 24: | ||
====KE30/35/36/38==== | ====KE30/35/36/38==== | ||
*[[Series:K/Model/KE30/35/36/38/Template| | *[[Series:K/Model/KE30/35/36/38/Template|KE30/35/36/38/50/55/55p Suspension]] | ||
At the moment, this information is in regards to the leaf springs. | |||
KE35 and 55 coupes, From factory are 1.5 inches (38mm) lower than a KE30/55 Sedan. | |||
KE36 and 38 Wagons and Panelvans, From factory are 5/8th of an inch (15mm) higher Than a KE30/55 sedan. | |||
KE50/55p are unknown as of yet, but will be added once confirmed. | |||
====KE50/55==== | ====KE50/55==== |
Revision as of 06:59, 13 October 2011
Welcome to the Rollaclub FAQ
This FAQ Has been migrated to WIKI format from the Oldcorollas FAQ, maintained by Super Jamie.
Further Discussion of any articles here may be made on the: Old Corollas Yahoo Group andhttp://www.rollaclub.com/faq/index.php?title=Main_Page Rollaclub Messageboard
Series
K
Model
KE10/11/15/16/17/18
KE20/25
KE30/35/36/38
At the moment, this information is in regards to the leaf springs.
KE35 and 55 coupes, From factory are 1.5 inches (38mm) lower than a KE30/55 Sedan.
KE36 and 38 Wagons and Panelvans, From factory are 5/8th of an inch (15mm) higher Than a KE30/55 sedan.
KE50/55p are unknown as of yet, but will be added once confirmed.
KE50/55
KE70
A
Model
AE70/71/85/86
AE80/82
AE90/92/93/94/95
Tech
Engine
K Series
General Information
How To Build A Tough 'K' Motor
How To Fix 'K' Motor Oil Leaks (Problems And Cures)
KE1x Series 'K' Engine Specific Info
Nippon Denso Distributor Part Numbers
How to build a TRD spec Upright motor!
K (1077cc)
2K (993cc)
3K (1166cc)
4K (1290cc)
------------4K-C
------------4K-E
5K (1496cc)
5K Hydraulic To Solid Lifter Conversion
7K (1812cc)
Terminal Voltages And Diagnostic Codes
A Series
Installing EFI Lifter Pump into AE86 Fuel Tank
Removing the Air Bypass Valve on a 4agze
S Series
T Series
E Series
Fuel System
How To Set Up Your Fuel System
Drivetrain
(In logical order of drivetrain after the flywheel)
KE30/55
--Grimwolge 12:46, 18 Jul 2005 (EST)
Suspension
General tips and hints
KE1x Suspension
KE2x Suspension
KE3x Suspension
KE5x Suspension
KE7x Suspension
Brakes
Electrical
Emission Systems
Reference Material
Homologations - Listing of FIA Homologated Corollas for Group 1-4 and Group A
Codes - Engine, Body, Axle
Service
Torque Specs
Maintenance
Body
Engine
Upgrades
Corona Power Mirrors into late KE70/AE71
KE70 cable to hydraulic clutch
KE70 Single to Twin Headlight Wiring
Engineering your Car
Overview
History
RWD corolla history http://reocities.com/COLOSSEUM/4883/crwd.html
Related
the bit where jamie can edit the main page is cool :D