Series:K/Model/KE10/11/15/16/17/18/Chassis: Difference between revisions
Jump to navigation
Jump to search
(Created page with 'Tie Rod Tubes In the KE1X series there were two types of tie rods used in the car. The length of the tie rods are all the same at 138mm long. The difference in them was the th…') |
No edit summary |
||
Line 1: | Line 1: | ||
Tie Rod Tubes | <u><B>Tie Rod Tubes </b></u> | ||
In the KE1X series there were two types of tie rods used in the car. | In the KE1X series there were two types of tie rods used in the car. | ||
Line 9: | Line 9: | ||
Early KE1X had a course thread, while late model KE1X had a fine thread. | Early KE1X had a course thread, while late model KE1X had a fine thread. | ||
The thread pitch and size is below: Fine thread: M12X1.25 Course Thread: M12X1.5 | The thread pitch and size is below: | ||
Fine thread: M12X1.25 | |||
Course Thread: M12X1.5 | |||
Information by: Camerondownunder88 | Information by: Camerondownunder88 |
Latest revision as of 10:24, 12 January 2011
Tie Rod Tubes
In the KE1X series there were two types of tie rods used in the car.
The length of the tie rods are all the same at 138mm long.
The difference in them was the thread cut inside the tube.
Early KE1X had a course thread, while late model KE1X had a fine thread.
The thread pitch and size is below: Fine thread: M12X1.25 Course Thread: M12X1.5
Information by: Camerondownunder88