Tech:Electrical/Starter Motor/Conventional Type: Difference between revisions
MedicineMan (talk | contribs) No edit summary |
MedicineMan (talk | contribs) No edit summary |
||
Line 32: | Line 32: | ||
The brushes, pressed against the segments of the armature commutator by the brush springs, Allow the current to pass from the field coils to the armature. | The brushes, pressed against the segments of the armature commutator by the brush springs, Allow the current to pass from the field coils to the armature. | ||
<code><pre>Weakened brush springs or worn brushes may lead to insufficient electrical contact between the brushes and the segments of the commutator. The resulting excessive electrical resistance at the contact points will reduce the supply of current to the motor, Impeding torque build-up.</pre></code> | <code><pre>Weakened brush springs or worn brushes | ||
may lead to insufficient electrical contact | |||
between the brushes and the segments of the | |||
commutator. The resulting excessive electrical | |||
resistance at the contact points will reduce | |||
the supply of current to the motor, | |||
Impeding torque build-up.</pre></code> | |||
Back to [http://www.rollaclub.com/faq/index.php?title=Starter_Motor Starter Motor] | Back to [http://www.rollaclub.com/faq/index.php?title=Starter_Motor Starter Motor] |
Revision as of 10:00, 27 June 2007
Conventional Type
Construction
This type of starter motor contains a magnetic switch, Electric motor, Drive lever, Pinion gear, Starter clutch etc. The pinion gear is located on the same axis as the armature and rotates at the same speed as it. The drive lever connected to the magnetic switch plunger pushes the pinion gear and and causes it to mesh with the ring gear.
1. Magnetic switch.
The magnetic switch (Also referred to as a Solenoid) consists of a hold-in coil, Pull-in coil, A return Spring, A plunger and other components. It is activated by the magnetic forces generated in the coils and carries out the following two functions:
- It pushes the pinion gear so that it meshes with the ring gear.
- It serves as a main switch or relay, Allowing heavy current to pass from the battery to the starter motor.
2. Field Coils.
The electrical current from the magnetic switch flows through the field coils, Which generate the magnetic field required to rotate the armature.
3. Brushes.
The brushes, pressed against the segments of the armature commutator by the brush springs, Allow the current to pass from the field coils to the armature.
Weakened brush springs or worn brushes
may lead to insufficient electrical contact
between the brushes and the segments of the
commutator. The resulting excessive electrical
resistance at the contact points will reduce
the supply of current to the motor,
Impeding torque build-up.
Back to Starter Motor
Back to Main Page