Tech:Engine/A Series/External Thermostat

From Rollaclub
Jump to: navigation, search

The easiest way to pipe your FWD/FR/FF 4AGE's cooling system for a RWD/FR conversion is to run an external thermostat off an AE82 4A-C engine. You will also require some piping and hose clamps. There are a few websites that have a good reference of how to go about this.



Here is an article in Japanes on what goes where in the installation of the remote thermostat.


Et1.gif Et2.gif Et3.gif

Et4.gif Et5.gif


Sourced From http://www3.kcn.ne.jp/~shin-ota/water.html


Here is a picture of the External Thermostat installed on a 100KW 4AGE.


Rear water outlet installed.jpg

Rear water outlet installed explained.jpg


Sourced From http://forums.toymods.org.au/index.php?t=msg&th=28710&rid=5025&S=a080c38b20a8a5774f598e3374f9fc31&pl_view=&start=0#msg_483109



Article by Medicine_Man


Back to A Series Engines

Back to Main Page

Rollaclub