Tech:Engine/A Series/Installing EFI Lifter Pump into AE86 Fuel Tank

From Rollaclub
Revision as of 10:22, 11 October 2005 by MedicineMan (talk | contribs)
Jump to navigation Jump to search

During my 4A-C to 4AGE engine conversion in my Australian AE86 sprinter it came time to upgrade to fuel system to be able to meet the new demand for fuel. Being a naturally aspirated engine beforehand there is no in-tank fuel pump, only a mechanical fuel pump on the engine (driven by the camshaft). Japanese AE86 Sprinters on the other hand came from factory with a 4AGE engine and the EFI tank to suit. I had 2 options, find a tank from a Japanese AE86 (Can be expensive) or install my own generic lifter pump setup inside the tank. I opted to use a VL/VK Commodore lifter pump inside the tank. (This setup could also be adapted to other non efi tanks (KE70/AE71 etc).


To start with I removed the fuel line setup from the top of the fuel tank.


Post-6-1128150134.jpg

The lifter pump will be fitted where the old in-tank fuel filter is, it can be removed easily.

Post-6-1128150277.jpg

Retrieved from "https://www.rollaclub.com/wiki/index.php?title=Tech:Engine/A_Series/Installing_EFI_Lifter_Pump_into_AE86_Fuel_Tank&oldid=433"