Tech:Engine/A Series/Replacing Your Timing Belt

From Rollaclub
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Just set the motor to top dead centre (Take the oil cap off and you will see the recess in the top of the intake cam) That lets you know that its on top dead centre. (Good to have a screwdriver in #1 to see the piston come up too). Then make sure the two dots on the cam gears line up with the marks on the backing plate. Check that the crankshaft lines up with the dot on the oil pump body. I marked my old belt with whiteout so I could be sure it went on exactly the same..


Timing belt marks 4age.jpg


Article by Medicine_Man

Back to A Series Engines

Back to Main Page

Rollaclub

Retrieved from "https://www.rollaclub.com/wiki/index.php?title=Tech:Engine/A_Series/Replacing_Your_Timing_Belt&oldid=2825"