Tech:Engine/K Series/K: Difference between revisions

From Rollaclub
Jump to navigation Jump to search
No edit summary
mNo edit summary
 
Line 1: Line 1:
[[Category:KE1x]]
'''Following some discussion on the messageboard, I decided to put some of the KE1x series 1080cc "K" Engine information up here... Link to the discussion can be found [http://www.rollaclub.com/board/index.php?showtopic=3549 here]'''
'''Following some discussion on the messageboard, I decided to put some of the KE1x series 1080cc "K" Engine information up here... Link to the discussion can be found [http://www.rollaclub.com/board/index.php?showtopic=3549 here]'''



Latest revision as of 01:46, 16 September 2012

Following some discussion on the messageboard, I decided to put some of the KE1x series 1080cc "K" Engine information up here... Link to the discussion can be found here


If it is a true K-B motor then it already has 10 to 1 CR. The K-B head on a 3K motor should give 10.7.

So how do you tell if it is a true K-B - check the inlet manifold face on the head to verify if there is a water hole to the inlet manifold, should be below no 4 inlet port. Look after the gasket as I imagine they might be hard to get these days.

The other differences that you might explore - the lighter K-B flywheel and the K-B camshaft with the extra 10 degrees duration, an 18/58 vs 16/50.

Reference:



Article by SprintaSL / Grimwolge



Back to K Series

Back to Main Page

Rollaclub