Upgrades:Corona Power Mirrors into late KE70/AE71

Swapping Corona Avante power mirrors into late KE70 / AE71 mirrors

Thanks to Teddy we have found out that the Corona Avante power mirrors are almost the same as a KE70. They share the same dimension mirror, Though the base is slightly different (Different body lines). In this guide I will explain how we converted the standard KE70 mirrors to house the Corona power mirrors. (Corona Avante mirror base on the left, Late KE70/AE71 mirror base on the right).

With the Corona mirror base, you can see it does not follow the door line at the bottom. I also noticed only one of the screws lines up with the holes on the back.

The AE71/KE70 base actually follows the line of the door, You have to modify it to fit the clip in that the spring connects to.

You will need,

Late KE70 / AE71 mirrors

Corona Avante Mirrors

Corona Avante Mirror switch with wiring plug

Corona Power Mirror Wiring Diagram

Dremel and a Cordless drill

Small pin punch and vice grips

This is the Corona Avante Power Mirror Switch.

This is the Wiring Diagram for the power mirrors.

Red/Green - 12V Fused Power (Off Ignition Switched Power)

White/Black - Earth to Chassi of vehicle

Light Green/Red - Mirror Common Power

Brown/Yellow - Left Hand Mirror, Up and Down

Brown/Black - Left Hand Mirror, Left and Right

Light Green/Black - Right Hand Mirror - Up and Down

Light Green - Right Hand Mirror, Left and Right