KE55 Front Strut Upgrades

From Rollaclub
Revision as of 02:35, 7 June 2009 by Falken KE30 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This is a quick Guide to What struts fit in the KE3X/ KE5X series corolla's.

XT130 Corona

XT130 Struts will NOT fit in as they are. You will need to cut the lower spring perch off and re welded KE30 or KE55 lower spring perch on. You will need to use the matching Top spring hat and the Top part with the studs. Coilovers would be the way to go though.

Other parts you will need is the XT130 steering arms, and the XT130 brake hoses.

TA22 Celica


TA22 will fit straight in as is with stock springs, and top hats ect. Standard they are a tad higher, and also give a really small amount of + camber. Ive found with 2.5" lowered springs the camber sits basically on 0. so longer LCA's or Camber tops will adjust this.

Other parts you will need is TA22 steering arms, also T18 steering arms fit as that's what im using, and also once again the Brake hose.

RA40 Celica

Same deal as the XT130, needs spring perch re welded or convert to coil overs. and use the top hats from the KE30 or 55.

Parts needs is RA40 steering arms, and brake hoses.


Will be updating as i find out more about other struts, RA60 celica ones fit, but heard about + camber problems. but will update later


Falken_KE30 (aka Dan)

Retrieved from "https://www.rollaclub.com/wiki/index.php?title=KE55_Front_Strut_Upgrades&oldid=3646"