Removing the Air Bypass Valve on a 4agze: Difference between revisions

From Rollaclub
Jump to navigation Jump to search
No edit summary
 
No edit summary
Line 1: Line 1:
An Air Bypass Valve (ABV) acts like a blow off valve for supercharged engines as in the case of a 4agze. The ABV acts like a reliefe valve to reduce boost when not needed. It does this by bypassing the pressurised air back into the intake manifold to increase engine life and economy. Removing the ABV as im about to show you, is a common mod to increase engine performance that so many crave from the little 1.6Lt donk. If done right and the conditions are suitable, then benefits could be as much as another 1 psi of boost.
An Air Bypass Valve (ABV) acts like a blow off valve for supercharged engines (As in the case of a 4agze). The ABV acts like a relief valve to reduce boost when not needed. It does this by bypassing the pressurised air back into the intake manifold to increase engine life and economy. Removing the ABV as I'm about to show you, Is a common modification to increase engine performance that so many crave from the little 1.6L donk. If done right and the conditions are suitable, Then the benefits could be as much as another 1 psi of boost.


There are 2 ways to go about stopping the Air Bypass Valve on a 4agze. Many people do this at the same time as fitting a front mounted intercooler as it saves time refitting it all while the motor is still in the engine bay in rear wheel drive format.
There are 2 ways to go about stopping the Air Bypass Valve on a 4agze. Many people do this at the same time as fitting a front mounted intercooler as it saves time refitting it all while the motor is still in the engine bay in rear wheel drive format.


The first and easiest way to stop the ABV is to litterly plug it off. That is stop the vaccume reaching it to activate/deactivate when needed.
The first and easiest way to stop the ABV is to literally plug it off. This will stop the vacuum reaching it to activate/deactivate when needed.




''Bah...will finish later sooo tired now''
''Bah...will finish later sooo tired now''

Revision as of 11:41, 21 August 2006

An Air Bypass Valve (ABV) acts like a blow off valve for supercharged engines (As in the case of a 4agze). The ABV acts like a relief valve to reduce boost when not needed. It does this by bypassing the pressurised air back into the intake manifold to increase engine life and economy. Removing the ABV as I'm about to show you, Is a common modification to increase engine performance that so many crave from the little 1.6L donk. If done right and the conditions are suitable, Then the benefits could be as much as another 1 psi of boost.

There are 2 ways to go about stopping the Air Bypass Valve on a 4agze. Many people do this at the same time as fitting a front mounted intercooler as it saves time refitting it all while the motor is still in the engine bay in rear wheel drive format.

The first and easiest way to stop the ABV is to literally plug it off. This will stop the vacuum reaching it to activate/deactivate when needed.


Bah...will finish later sooo tired now