Replacing front strut inserts on your KE1x

From Rollaclub
Revision as of 12:10, 21 May 2008 by Philbey (talk | contribs) (KE1x Suspension Help moved to Replacing front strut inserts on your KE1x: Old name was confusing with the new menu structure for the suspension section.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Finding it hard to find Shock Absorbers for your KE1x series? Doug (aka Felix) has an answer:


ke2/3/5x strut inserts will fit [a ke1x] with a 1" spacer.

if you have the original oil filled struts still, you are in luck. dismantle, take the inner cylinder and knock off the upper rod guide. bingo, you have a perfect sized spacer. slide the rod guide over the shock shaft of your new ke2/3/5x inserts and install into the strut bodies.

Discussion to be made in this thread on the forums :

http://www.rollaclub.com/board/index.php?showtopic=7224

Thanks to Felix for his wealth of information once again.

--Grimwolge 18:37, 20 Apr 2006 (EST)

Retrieved from "https://www.rollaclub.com/wiki/index.php?title=Replacing_front_strut_inserts_on_your_KE1x&oldid=3252"