Tech:Engine/A Series/External Thermostat

From Rollaclub
Revision as of 12:30, 21 June 2005 by MedicineMan (talk | contribs)
Jump to navigation Jump to search

The easiest way to pipe your FWD/FR/FF 4AGE's cooling system for a RWD/FR conversion is to run an external thermostat off an AE82 4A-C engine. You will also require some piping and hose clamps. There are a few websites that have a good reference of how to go about this.


Here is an article in Japanes on what goes where in the installation of the remote thermostat.


Et1.gif Et2.gif Et3.gif

Et4.gif Et5.gif

Sourced From http://www3.kcn.ne.jp/~shin-ota/water.html

Here is a picture of the rear water outlet installed on a 100KW 4AGE.


Rear water outlet installed.jpg

Rear water outlet installed explained.jpg

Sourced From http://forums.toymods.org.au/index.php?t=msg&th=28710&rid=5025&S=a080c38b20a8a5774f598e3374f9fc31&pl_view=&start=0#msg_483109

Retrieved from "https://www.rollaclub.com/wiki/index.php?title=Tech:Engine/A_Series/External_Thermostat&oldid=325"