hey all

 

i have a ke55

 

it wouldnt start so my mechanic checked it all out and ended up replacing the regulator on the altenator, and i forgot how it goes back into the car.

 

theres a wire coming from the positive terminal thats loose and was on it

also a female socket that connects to the back of it

 

also when i hook it all up

 

it tries to start once, then stops and clicks

then u got to try and start it again and nuthing at alll happens

 

i checked the fuse box in the car and they are all normal?

 

any suggestions help on how to put it back together on the car

 

pictures would be great

thanks guys

flat battery? or your starter motor solenoid is no good maybe

i try to jump start the car and it doesnt do nuttin

 

just tries to start once then stops and clicks

then if u go to do it again, then it dosent do nuttin

 

i think its the connecting up i need to no how to put it back

mine only has two wires one with a rond lug on it that goes to the post with the nut on it and a plug with a couple of wires on it that just plugs in to the alternator so simple that i doubt you would be able to get it wrong hope this helps.

yes that helps

yes mine has a round lug on it too

but where does the round lug go

i no onto the thread

can u post a picture of urs setup and running so i can mimic it

thanks mate

sorry can't put pic up of it wired up as mines currently not in due to being half way through an engine and gearbox conversion, you just slip the round lug onto the threaded post and tighten the nut and washer onto it then bobs your uncle it will be fixed

i decided to take a couple of pics for you to try and help as you can see there is only two wires the plug only fits in one place and the lug goes to the post right beside the plug sometimes theres a little cylinder thing thats screwed to the back of the alternator that also goes to the threaded post cheers,john

thanks for the help mate youve been really helpfull

 

i will post pitures of my pickle

 

coz mine a bit different

hey i fixed the problem thanks anywyas dude