Weber 32/36 Or 34/34

[chrisandliz[RL]]

hi boyz and girlz, I have got a bit of a weber carby hored going. I have got 40 dcoe, 32/36 X 2 and a 34/34dms. I am looking to put one on my standard 4k engine, any one jetted one up for this before?

 

p.s. i can use google. I riped this super jamie's web site (top guy)

 

A Weber 32/36 DGV is the most common aftermarket downdraft around. Usually you'll need to jet down a carburettor like this, unless someone has already done the work for you, or you have a fairly modified engine. For a 3K/4K, start at around 130 mains, 170 air jets, 50 idle and take it from there. Basic tuning tips: If the car "stumbles" forward but revs eventually climb, you're running too rich. If the car just cuts and dies, you're running too lean.

 

i'll post up some pics if any one is intrested.

 

chris