Hi all,

 

Almost finished screwing together a 5k i plan on using with a sc14 supercharger. I'm wanting to

find some info or eqaution to figure out how to get about 7-8psi of boost at 5-5500rpm.

I have a crankshaft pulley/balancer of 148mm diameter.

 

Any help would be greatly appreciated

Justin.

Supercharger/Engine Capacity and PSI calculations

There you go mate

 

EDIT: Just did the calcs, and if i did it all correct. it works out that you will need a pulley with a diameter of 80% of the crank pulley. if the crank pulley is 148. your SC pulley will need to be about 185mm in diameter.

 

CHEERS

Ryan

Edited May 20, 200917 yr by SLO-030

Supercharger/Engine Capacity and PSI calculations

There you go mate

 

EDIT: Just did the calcs, and if i did it all correct. it works out that you will need a pulley with a diameter of 80% of the crank pulley. if the crank pulley is 148. your SC pulley will need to be about 185mm in diameter.

 

CHEERS

Ryan

 

 

Thanks Ryan, thats exactly what i was looking for