deadkelly Posted December 15, 2009 Report Share Posted December 15, 2009 what sort of cam lift can i put into a 4ac motor ? i have a 4ac in a ae 71 83 carolla it has towing gears ,( will check diff ratio on weekend ) & a 3 speed auto that shifts hard ( really bangs into gear & has done since my mate got it about 7 years ago ) the engine was fully rebuilt 3 1/2 years ago with new acl pistons + 1mm over . the head was mildly ported ( just cleaned up / deburred casting flash but lightly ran over entire port with burr then finished with tape ) i have a rebuilt 32/36 webber carb & adapter plate & new air cleaner . if i regrind my cam for more top end & use a stall covertor & extractors what sort of hp could i expect ??? & how much does a 4ac have std ?? if i do this i'll buy the extractors first & install them & take the car off the road over easter & do the cam & stally & carb @ the same time then get it tuned hahaha . i only expect 20% power in crease & any more would be a bonus . ( i can feel when the porting kicks in mid to top end haha ) over time i will put new shocks in it ( maybe lowered springs ) & respray it & tint the windows . it's just my A 2 B car ( btw it has a kick arse stereo ) it also has a super trap muffler with 2" exhaust . cam spec's lift & duration ??? what can i get away with ?? thanks guys Quote Link to comment Share on other sites More sharing options...
mikey_m Posted December 24, 2009 Report Share Posted December 24, 2009 Ring Crow CAMS, they are veyr helpful on 03 9357 0469, there is a mild grind they can do on them . They no longer have patterns for new cams for the 4AC. But they are cheap and very helpful, they will be doing a new one for me in the next few weeks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.