Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

My Ke70 Build

Featured Replies

Well seeing as how I'm not the kinda guy that is used to posting online on forums I'm not sure how this build thread will turn out i will try and keep it short and simple. i like looking through other peoples so i thought id contribute

Car: Ke70

Year: 1984

Originally yellow

 

When i bought it, No rego, welded diff, bald rear tyres, 430,000ks, speedo didnt work, was miss match matte black had 14" cheviots on the front sprayed orange the motor wasnt idling properly the timing was out it had some rust and dents, one fender mirror, drivers side bucket seat would retract on you and slide backwards, along with no carpet a gay steering wheel, a broken rear exhaust bracket.

 

Needless to say i have mostly fixed all this, pictures are worth more than words so here goes, kinda in order.

 

post-20300-0-62462400-1392525079_thumb.jpg

When i first got the beast, very ugly i know.

post-20300-0-91700100-1392525085_thumb.jpg

Orange Cheviots

post-20300-0-22735100-1392525088_thumb.jpg

finished bonnet and boot with Matt black grossness

post-20300-0-58940000-1392525082_thumb.jpg

Cleaned engine bay

post-20300-0-51766000-1392525077_thumb.jpg

Photo with a mates rolla, yeah he bought that thing stock as a rock for $150 no rego in roadworthy condition so jealous

post-20300-0-93091300-1392525270_thumb.jpg

Sprayed a rising sun on my fuel flap for shits and giggles left it there for a while

post-20300-0-27004000-1392525269_thumb.jpg

Custom rear roof lip made from some crappy venetian thing attatched with loads of sikaflex

post-20300-0-12234300-1392525273_thumb.jpg

Started some rust and guard repair

post-20300-0-96877200-1392525266_thumb.jpgpost-20300-0-96804400-1392525275_thumb.jpg

Very quickly became patched in primer, Bought a Tsurikawa ring just had to.

  • Author

Ive got alot of progress photos of what i did on my iphone just have to get them off it.

 

post-20300-0-78317200-1392525637_thumb.jpg

Whole car in primer

post-20300-0-20391500-1392525635_thumb.jpg

Cut the end off intake and drilles holes in it for more flow

post-20300-0-64990700-1392525629_thumb.jpg

Exhaust before i got it fixed hanging low

post-20300-0-29158200-1392525632_thumb.jpg

Sprayed clear over the boot to see results

post-20300-0-71580400-1392525642.jpg

Bought new rims :D

post-20300-0-30342200-1392525625_thumb.jpg

Fitment with 25mm bolt on spacer

post-20300-0-58323300-1392525644_thumb.jpg

Black pillars got 2 new fender mirrors now aswell

 

I also have added a custom gearknob, volt meter, mp3 media usb etc player basically a cd player but no cds, 2 6x9s in rear parcel shelf for speakers not overly fussed on speakers, 20mm bolt on spacers in the rear that sit flush with the guards lips rolled over, have a dash fan haha i love that thing, door courtesy light under dash near key barrel red led strip looks mad a night time.

 

Future mods include, Paint, hydraulic handbrake, Central locking and alarm, fiat 1608 twin cam twin webber motor to go in it, it was free off my old man so I'm cheering just needs to be built

post-20300-0-39012100-1392525641_thumb.jpg

  • Author

Fiat 1608

Got one of these donks to go into it.

Good for 100hp stock rev to 10,000rpm, Just need to find webbers and some other bits and pieces before i start to mock up fitment. Already know i will need custom extractors to clear steering shaft. And it will sit slightly high in the front unless i modify k frame

post-20300-0-99097200-1392687536_thumb.jpg

If anyone can answer how hard it will be getting this engineered with this motor in nsw? will also be doing front s13 running suspension and brake conversion so will have larger discs and calipers in the front.

Edited by StealthSmiff

  • 3 weeks later...
  • Author

Just installed eGay central locking and alarm will take some photos if anyone is interested, got 4 actuators with the kit only installed actuators in two front doors cause they are likely to fail eventually from the load so I have 2 spare now in case. Alarm is hectic loud so I might resist its 12v to 6v.

There are no factory wires going into doors so I had to drill my own holes to run them just need some ribbed conduit for extra protection.

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.