Ke20 Ball Joint And Lower Control Arm

[TommyD]

i have a ke20 that the previous owner had put corona(st141) strut into. So the problem have is matching the ke20 lower control arm to the corona strut and steering knuckle as the shaft on the ball joint is much smaller on the ke ball joint. The previous fix was an unholy matching were they had cut and welded 2 diferent lower control arms together, i want a fix that an engineer will condone.

So does anyone know of a ball joint that will fit the ke20 LCA and the 16mm hole in the coronna steering knuckle?

Is a shim on the smaller ball joint a no no?

Or is their an alternate LCA that will do the job?

i have looked for but been unable to find someone to make me a new set.

any help would be appreciated.

[B.L.Z.BUB]

TE27 steering arms will accomodate the struts. Or techno toy tuning sell ball joint adapters.

[TommyD]

will the te27 strut go into the Ke20 as techno toy have full struts also have ae86 and more i want more out of them than the stock corona ones. also want to do the rear?