sr-rolla

##### turns out I'm on my mates name but yeh ####### ok so been working faily hard on it the last 3 or 4 days. it now has the modded manifold. turbo, gate, dump pipe, o2 sensor, injectors, most of the cooler piping, 4-5 stud spacers front with watanabe's 16x8 +8 (offset including spacers) are all on. had to mod the oil drain and feed but its all together now and is at the exhaust shop now getting the screamer and dump to front pipe modded. I'm also getting the cold side cooler piping modded to fit the rb20 afm so i don't need to run a filter. so on the to do list now is steal my mates 15x8 -4 supers for the back (it will eventually run rota 16x8+4s) rear shocks, cut rear springs, new front coilovers, new brake master so i can run GTR 4 pot brakes, r31 diff convo, bride or sparco fixed back, new bushes through the front of it, new swaybars and panhard, and drive it to melb to get DR Drift to fine tune it probably with a new fuel pump and bigger injectors. oh and still need to mount and wire the LS1 coils but sussed how to do all that so wont be too hard. I'm hoping i can get 230rwkw out of it before any major engine failures. i think it has everthing to make the power now just needs the right tune. pictures will be up as soon as i ave it back. i realise build threads arnt much good without them so ill get my act together. cheers