Tailshaft For 72-74

[EX1200]

can anyone help me with finding out if 72-74 corollas have the same size tailshaft cause i recently put a 3K out of what i think was a 72 model in my KE11 but i forgot to take out the tailshaft,my tailshaft is to small wont fit on to gearbox can anyone plz help??

[Super Jamie]

you'll need to start taking about models - ke11, ke20, ke30, etc

 

have a read of the tailshaft section of my faq

http://www.superjamie.net/oldcorollas/driv.../tailshaft.html

[EX1200]

well if it came from a 1972 rolla with a 3K engine its KE20 and i have a KE11 so my question was does the tailshaft from 1972-1974 have the same size tailshaft so i can find one to continue my work thank you!

[Super Jamie]

no, it doesn't

 

some ke20s in australia had a borg warner diff, some had a jap diff, so the diff pinion and maybe the unis will be different

 

if they both had jap diffs, then the ke20 tailshaft just needs to be shortened a bit. and if the diff pinions are different, you can change them over as all jap tailshafts have the same universal joints. i have a ke10 tailshaft somewhere, i'll see if i can find it and measure it for you

[irokin]

If the KE20 was delivered from japan it will have a banjo diff. If it was assembled in Australia it will have a borg warner diff except for a select few (mid 1973 I THINK) that have banjo diffs due to supply problems with borg warner (I think employees were on strike or something?)

[EX1200]

so i need to measure the bit on the gearbox to find out what i need I'm not an expert on cars so u should know what i mean about the bit on the gearbox where the tailshaft goes???