K Engine Metal And Rubber Engine Mount Compatability

[Sam_Q]

hi guys, I would like to know what people have found in terms of comparing the metal engine mount brackets off various K engines and their associated rubber engine mounts.

 

Basically I would like to find out if the metal engine mounts on the crossmember of a KE70 are the same as the KE models. From what I understand the pre KE30 corollas have mounts that are even closer.

 

I am thinking if the metal mounts on all the K engines are the same and the rubbers are the same then the distances must all be right.

[seabiscuit]

When I swapped a KE2x mounted engine into a KE70, I found that KE70 engine mounts were LONGER than KE2x mounts. So I would then

assume that the KE70 ones are the only different ones compared to everything else (meaning KE1x, KE2x, KE3x and KE55 are all the same).

I'm not 100% sure, but that's what my guess is.

[Sam_Q]

good guess but i have been told that ke10 and ke20 are the narrow ones