just wondering if these 16X7 +15 offset with FIRENZA ST08 205/45/16 tyres wil fit on a stock 75 ke30 without modification.

cheers.

The maximum backspace you casn have on most ke70s that run ae86 struts is 125mm.

 

They are 16 x 7 + 15 so the mounting surfaces meet 15mm outside the centre of the wheel. Being a 7J the wheel including the tyre sealing beads will be 8 inches wide. So 4 inches plus 15mm is your backspace. 115mm. Yes they will fit neat on a ke70 strut but you could go wider offset and or width if you wanted to make them look better. Look for an 8 inch at zero offset, or an 8.5 at neg 10 approx.

Edited May 16, 201115 yr by LittleRedSpirit

Yes they should fit a stock ke30 without mods, as their struts are almost identical to a ke70s. The 30s can handle a bit less offset thanks to the design of the gaurds, so the 7s should be pretty trouble free to put on and drive, even if its lowered.

thanks for the help, i could get 16X8 on the rear with 0 offset and 16X7 on the front with +15 offset,

but do you think the 8 wides will fit into the rear gaurds without mod? i thought they might just be too wide

Edited May 16, 201115 yr by alex.wilson

anyone got any ideas on what 8's with a 0 offset on a stock ke30 rear suspension setup would be like?