Taz_Rx Posted January 6, 2013 Report Share Posted January 6, 2013 Just find a cheap but half decent aftermarket ecu for $200-300.... Then you'll actually hasn't tunability! Get a wolf 3d v4 and ill send you a map! Quote Link to comment Share on other sites More sharing options...
starky Posted January 7, 2013 Author Report Share Posted January 7, 2013 Just find a cheap but half decent aftermarket ecu for $200-300.... Then you'll actually hasn't tunability! Get a wolf 3d v4 and ill send you a map! you already have a map for the 7k efi? what were your dyno figures? Quote Link to comment Share on other sites More sharing options...
Taz_Rx Posted January 7, 2013 Report Share Posted January 7, 2013 100rwkw on 10psi a few years ago. Road tuned it a couple of months ago, i'd guess about 120-130 now. Click "tar"in my signature. Quote Link to comment Share on other sites More sharing options...
starky Posted January 8, 2013 Author Report Share Posted January 8, 2013 do any other toyota engines bolt up in place of the k series? like y series? Quote Link to comment Share on other sites More sharing options...
starky Posted January 8, 2013 Author Report Share Posted January 8, 2013 does any one know if a 5k manifold will bolt up to a 7k-e head? the reason i ask is because i don't have the time to bugger around with the injection just yet. plan is to buy the donor engine throw it in with the 5k manifolds (if this is possible) and then when i have more fit the injection Quote Link to comment Share on other sites More sharing options...
Taz_Rx Posted January 9, 2013 Report Share Posted January 9, 2013 Sure will. Be aware that both the inlet and exhaust ports will be bigger than the manifold runners though. As I said earlier 7kc are the same size. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.