April 3, 201412 yr comment_680543 Hey, a coupple of days ago i desided to build myself a cart form parts i got laying arround... the plan.. welded together the frame.. note. I'm not good at welding but i do my best.. bought some wheels started making the steering working steering found some bearings for the rear axle.. got a flywheelnut and a gear selector form a friend conected the wiring haness and bolted on the flywheel and carb, and it fired up! welded on a bar .. ahead of that I'm going to make a plate where ill have my feet, and were the pedals will sitt gear selector holding in the gear lever ... only need a bar between the gear lever and selector on the motor and thats how far iv gotten.. started on 31. mars :) Report
April 4, 201412 yr Author comment_680632 found a small sterring wheel and bought some threaded poles ( or whatever you guys call it) and made the steering a lot better Edited April 4, 201412 yr by SM Hunter Report
April 5, 201412 yr Author comment_680671 found short some 20mm bars.. drilled and taped them.. made some excelente spindles working steering system made the gearing work, and reinforced the engine mounts aswell added a joint to the steering wheel stick made a springed gas pedal stiff "swingarm" made housings for the bearings... now i need to get hold of a braking disc etc.. and a 20mm rear axle.. :) Report
April 6, 201412 yr Author comment_680731 welded the seat to the chassis.. welded a plate to mout the coil and ign. switch stuffed the wiring harness under it made a plate to mount the sprocket to a axle need to shorten the chain a bit a bit of thinking left... Edited April 6, 201412 yr by SM Hunter Report
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now