damo70 Posted August 16, 2006 Report Posted August 16, 2006 If anyone can point me in the right direction that would be great. I have an electronic distributor and was wondering how to wire it up on my KE 70. I have 2 wires, one yellow and one brown and I don't know where they go or what they are. Any advice would be greatly appreciated. :y: Quote
PMP020 Posted August 16, 2006 Report Posted August 16, 2006 one to the - side of coil and one to the + side of the coil. its that easy. cheers scott Quote
Rolla__Boy Posted August 16, 2006 Report Posted August 16, 2006 You also need to get a different coil. You need to remove the resistor from the car too, you need a "GT40" as opposed to a GT40R" coil. Run the factory wire that goes to the resistor straight to the coil, and leave the resistor out. Quote
PMP020 Posted August 16, 2006 Report Posted August 16, 2006 could explain why mine didnt run very nice. you rock my world rolla boy. cheers scott Quote
Xany Posted August 16, 2006 Report Posted August 16, 2006 (edited) if some one had of searched first, this question has been answered before... http://www.rollaclub.com/board/index.php?s...ic=2443&hl= Edited August 16, 2006 by Xany Quote
Rolla__Boy Posted August 17, 2006 Report Posted August 17, 2006 That still didn't cover the bit I added so :( Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.