wooshka

Hi, i'm just after some general advice on a 4k engine and where to go for some mechanical work to be done on the motor - the reason i'm asking is; The engine blows quite abit of blue smoke which indicates to my novice mind that the rings are possibly gone/going/cracked, also there is quite a substantial amount of blowby in the carby. The motor has done 300000 odd k's and I am quite suprised it's still running. So what I am after is the best place to either get these checked, and depending on the outcome, fixed. At the same time Id like to obtain a weber3236, a 25/65 cam, heavy duty springs and to also run 0.400" valve lift. I would like this to be all in the brisbane area or australia if I have to any of the items needed. Thank you so much if you can help me out, in advance!

14x8.5 SSRmk2's allround 1uzfe boot spoiler and chrome bars for now. : }

Picked up this thing for around 2k, really can't remember. Stock 4k 4spd Rings are fried pretty much, but still runs, brand new clutch before I bought it and country pack suspension. Original factory paint, interior and exterior are almost perfect, just a few little bumps from dings from trolleys and that, will get them fixed up. First things are first, new motor, it will have to be a 4k untill I have all my points back next year, so if you know any going around, let me know. Ordered for the springs to be reset, and for a pair of coils for the front. Will keep this updated as it progresses.

Hellooooo, I've been browsing this forum for a while now, from since when I started to get into Toyotas, which was when I first got my licence. how I first got it: 84 ae81 1.3 stroked to 1.5 weber 32/36 extractors cam What got me into Corollas was one of my older mates had one, and he had done it up and it was ʞ©$ɟing beautiful and blah blah blah got into an accident and wrote it off, but I still wanted one, pretty much exactly the same but with my own personal additives. Before my corolla, I was driving a Landcruiser 84 Model ʞ©$ɟing troop carrier fuel eater. It had its pros and cons, but it wasn't what I wanted, on another note, bought it for 2500, spent about a 1000 rebuilding it. Got my head together and shit and went out looking for a rolla, at the time I was basically new to the whole "JDM DRIFT STYLE SIC BRAH" scene, which at my age I thought it was cool because everyone with a geared up silvia or skyline had one. As I kept looking for one, it took months and months, rust bucket after rust bucket shit deal after shit deal, at one stage some idiot wanted 7500 for a 4k with Rotas? like what? Yeah in the end, I found one, a little yellow one. Had rust in the rear quarter panels, and around the boot trim but I loved it either way, don't know why but still did. At the time It had jdm stickers on it and what not, but soon after gave it a clean. A week after I got it, a close friend reccomended that we paint it, that he knew how to do it, and what not. So we started on it, not knowing how much it was going to take, well I'm guessing he did but I did not. When I first got it :) So we started taking it apart piece by piece, it took I'm guessing about a day with 6 of us to take it apart. Sorry about the quality, was taken off my phone at the time. After all that was done we booked in for the rust to be cut out and re-welded instead of bogged by a family business, but it took 7 weeks too long, and yet the job wasn't spectacular either way. We got it back and were deciding on a colour, we wanted to go the Chateau Mow on the GTR XU1 Toranas, but it was difficult to find, so we just went with a custom purple. It was a grueling process, trying to get everything as good as we could not being professionals. So after weeks and weeks of preparing, spray putting, stuff like that. We painted her. And she came out better than expected. Before you ask, it was raining before I took the photo :P oh and I drove it home without rego or a rwc, because it ran out during the rust cutting period /badass/ Just as a first post just to get some attention (if any) If people want to see what else we're doing to it, what we've done to the inside or whatever i'd be more than happy to keep going with updated posts :)

i will be der! Jordan (ke70)

Hey lads, I'm new hear and I was just looking for a few pointers on to where to get started. I'm looking for places to buy: Used Wheels eg, Formlua Mesh, SSR, Rota's, kind of like http://www.otomoto.com.au/c/4073478/1/used-wheels.html Ke70 parts: front lips. Cheap speakers! If you have anything for sale in the brisbane area hit me up here or just ask for my number :) Thank you !