rollavan Posted January 23, 2007 Report Share Posted January 23, 2007 (edited) Ok time for another question Will an ex TA22 T50 gearbox bolt up to my 4A series engine with the bell housing from my T40 gear box that i have in the car now, i'm not sure if the shifter will line up in the tunnel or if the bell housing will fit? I know that i'll need a different tailshaft as the 5 speed is a longer box but i just need to know if the box will fit before i buy it. Thanks for your help again guys Chris Edited January 23, 2007 by rollavan Quote Link to comment Share on other sites More sharing options...
Des Posted January 23, 2007 Report Share Posted January 23, 2007 http://www.rollaclub.com/board/index.php?s...=11230&st=0 Search and you shall find Quote Link to comment Share on other sites More sharing options...
rollavan Posted January 23, 2007 Author Report Share Posted January 23, 2007 my nad, i didn't search this time thanks for the link though. looks like I'm going to have to keep looking Quote Link to comment Share on other sites More sharing options...
skiddz Posted January 25, 2007 Report Share Posted January 25, 2007 my nad, i didn't search this time thanks for the link though. looks like I'm going to have to keep looking if you read any of my posts you will see that the celica t50 WILL mate to a 4A bellhousing with NO issues, and there is NO difference in the input splines like some seem to think, and AFIAK the t50 and t40 are the same length as they were interchanged in the LT and ET celicas Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.