Hi all,

 

How the hell do you get the back seats out of a KE70?

 

It doesn't say in the Gregory's manual and I don't have an original owners manual

 

Some clown put 6x9's in the parcel shelf without scewing them in or cutting the holes properly :) , what a pain in the ass!

 

Plus i like to be able to take the lower back seat out to fit more of my guitars/amps etc in.

 

Any info appreciated

Cheers,

Tom

the back section needs to be slid vertically, towards the roof. put your hand in the corner of the back and bottom or the rear seat, and lift it up.

Cheers mate i did try that but i'll try again - i'm guessing u gotta pull pretty hard...

Cheers mate i did try that but i'll try again - i'm guessing u gotta pull pretty hard...

 

 

There is a bolt or two retaining the slides, you may need to push the backrest and seat apart and use a socket extension on the bolt, then it should lift out ok. The slides are either side a few inches in from the doors. Good luck.

There is a bolt or two retaining the slides, you may need to push the backrest and seat apart and use a socket extension on the bolt, then it should lift out ok. The slides are either side a few inches in from the doors. Good luck.

 

ah yes, you should undo the bottom of the rear seat and take that out first.