Lukey Posted January 10, 2008 Report Share Posted January 10, 2008 hey guys my ke35 is soon to have her auto ripped out and a 4spd put in. I havent done this before and was just wondering what i need to put on my "TO GET LIST" so far i have on my list..... these things I'm 99% i have to get Pedal box manual gear box flywheel clutch clutch cable manual gearbox cross member and these things i think i have to get but not sure Manual tail shaft???????? Spigot bearing??????? sub-loom???????? fork connector???????? manual bellhousing bolts????????? if there is anything else pleese tell me thanks Lukey Quote Link to comment Share on other sites More sharing options...
dookie Posted January 10, 2008 Report Share Posted January 10, 2008 console speedo cable Quote Link to comment Share on other sites More sharing options...
Rolla__Boy Posted January 10, 2008 Report Share Posted January 10, 2008 You should try to find a car with a manual in it, and just pull the lot out. Quote Link to comment Share on other sites More sharing options...
AJC Posted January 10, 2008 Report Share Posted January 10, 2008 You will also need to fabricate up a section of tube for where there the clutch cable goes throught the firewall. The auto models have this blanked off. Manual models have a raise section off the fire wall which enables you to adjust you clutch cable against. Get some one to measure the length of this raise section for you so you can knock up an equivilent. Anthony Quote Link to comment Share on other sites More sharing options...
KE30_KE35_KE55 Posted January 11, 2008 Report Share Posted January 11, 2008 You will also need to fabricate up a section of tube for where there the clutch cable goes throught the firewall. The auto models have this blanked off. Manual models have a raise section off the fire wall which enables you to adjust you clutch cable against. Get some one to measure the length of this raise section for you so you can knock up an equivilent. Anthony may be lucky i have 3 autos ke30 ke55 all of them have had the sleeve already welded on the firewall. If not I will cut one off for you. I will have everything else you need as-well. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.