Hi all.

 

I have a Ke20 and the PCD on it is 114.3 all around, i was wondering how so. I know the front struts are from a ke30, as it had the bigger brakes (7 mm or somthing in OD).

 

I am not concerned by this as its easier to find wheels but which diff does the car have in it then? Everything looks stocko in the rear, its a '73 KE20.

 

Cheers

if the diff is dead stock it'd be 4x110.

Yeh thats what i'm asking, its not stock so what other kex diff's would fit a 30? It's a banjo type diff and it is defently 114.3 PCD

Believe it or not you have my old KE20 so I can give you a definitive answer. The diff is out of an auto KE30 (4.3 ratio) and has KE20 diff mounts welded on. You'll find its slightly wider than a KE20 diff. The front struts are KE20 items and have KE30 backing plates with KE70 hubs (KE20 bearings), calipers and rotors.

Believe it or not you have my old KE20 so I can give you a definitive answer. The diff is out of an auto KE30 (4.3 ratio) and has KE20 diff mounts welded on. You'll find its slightly wider than a KE20 diff. The front struts are KE20 items and have KE30 backing plates with KE70 hubs (KE20 bearings), calipers and rotors.

 

 

Ah ok, well it was a white ke20.... The front struts have the square bolt pattern for where the caliper mount bolts on and not the offset ones (i have a second pair of struts that came in boot of car) I am fairly sure Teddy knows the history of this car my mate works at toyota with him and i have talked to him about it abit