i just want to know..will w55 gearbox from 1g series engine fit in..

 

1.20v 4age

2.4age tvis

3.4agze

 

is it direct fit or we have to use back the t50 bellhousing? how about the longshaft?

no, you'll need a custom bellhousing. there are a couple of companies in NZ who make them, ask on garagedori.com

yep...custom bellhousing or adaptor plate...both will set you back between 300-400

 

theres a guy on the gold coast that makes the adaptor plate...you can find him on twincam.org under Aza510

 

bellhousing can be sourced from garagedori, dellows or a-spec...mine came from malaysia but i can't remember where

 

you'll need a custom tailshaft also

the best iv heard about is the niteparts bellhousing

its $750ish nz..

i can get those. they allow 2 diff slavecyls and use of larger (4agze) clutch

its $750ish nz..

 

yikes...have you got any photos Mr Revhead? the quality must be pretty darn good

they were made with the idea they would look and act factory, and they do

iv got pics, but not with me, I'm on hols at the mo...