Ae71Rola Posted July 5, 2009 Report Share Posted July 5, 2009 Hey guys, ive got everything i need to convert my ae71 to manul just need to know if there is anyone who has done it and has some good advice on how to do it... i.e the drilling of the holes for the master If there is anyone in adelaide willing to help put it in that would be much appreciated Quote Link to comment Share on other sites More sharing options...
Ae71Rola Posted July 9, 2009 Author Report Share Posted July 9, 2009 anyone able to give me a hand or hints to help Quote Link to comment Share on other sites More sharing options...
Prewer Posted July 9, 2009 Report Share Posted July 9, 2009 Have you googled it, theres a DIY tutorial if you look hard enough... http://www.rollaclub.com/board/?showtopic=10770 oh.. there it is Quote Link to comment Share on other sites More sharing options...
LukeAE71 Posted July 13, 2009 Report Share Posted July 13, 2009 I can lend you a hand but I am not going to drill it for you, it's your firewall after all :dance: It is a long job but easy enough once you are shown how :yes: Quote Link to comment Share on other sites More sharing options...
mikey_m Posted July 15, 2009 Report Share Posted July 15, 2009 For Mine, I used a piece of cardboard and made a template from the pedal box. The removed the master etc and traced onto the other side and bingo your done. But always, double measure and double check before drilling. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.