Hi guys, I have a cam for a 3K which I picked up some time ago but have never fitted. I was told it was very wild and unstreetable but was going to use in a hillclimb project.

 

I will probably be looking to sell this but firstly need it identified ( project went 4AGE)

 

Tried googling and product links for Wade and Crow cams but had no luck.

 

Attached is the "740" label stamped into the end.

 

Any help appreciated.

dunno man it could mean it has 0.740" lift?

doubt it, thats a fair amount of lift lol, email a few people who make and re-grind cam shafts... they may know

 

Hi guys, I have a cam for a 3K which I picked up some time ago but have never fitted. I was told it was very wild and unstreetable but was going to use in a hillclimb project.

 

I will probably be looking to sell this but firstly need it identified ( project went 4AGE)

 

Tried googling and product links for Wade and Crow cams but had no luck.

 

Attached is the "740" label stamped into the end.

 

Any help appreciated.

 

I was given some 3k cams a while back, some reground by Camshaft Engineering in Brisvegas. No longer in business. The guys at Ivan Tighe`s were able to identify 3 out of 4.

Their website is, http://www.tighecams.com.au/

Good luck.

It is a Crow 740 grind.

 

Duration: 280/286 (in/ex)

Timing in: 32/68 (seat to seat)

Timing ex: 73/33 (seat to seat)

lift at valve: .401/.401 (thou in/ex)

How Much you want for the cam ? ill pay postage