Valve Clearance For 20v On Ze Bottom With Ze Pistons

[KO 10]

G-day my name is pat i've started a 20v conversion into a ke 10 its attached to a supra 5 speed then to a VR holden diff I mechined up a tail shaft to, a friend has done most of the work leaving me to the small bits,now for the question do the 4agze forged pistons have enough valve clearance when the 20v head is bolted on and running i do know when turned over by hand they don't hit anything but by how much???

Edited February 6, 2010 by KO 10

[greenmac80]

there would be a bit of clearance i would think due to the lower compression? either way

it will work but.... if your timing belt goes you'll know all about it.

 

oh and lets see a project thread mate!!!

[KO 10]

there would be a bit of clearance i would think due to the lower compression? either way

it will work but.... if your timing belt goes you'll know all about it.

 

oh and lets see a project thread mate!!!

should'nt be a prob then hav'nt had one go yet and thanks for a reply

as for project i'll up date my photos and give a bit more detail of what i've done would love to hear from any one

who's done it befor